Hitachi WJ200-001S - Page 52

50
“d” Function
Run
Mode
Edit
Units
Func.
Code
Name
Description

Intelligent output
terminal status
Displays the state of the intelligent
output terminals:



Scaled output frequency
monitor
Displays the output frequency scaled
by the constant in .
Decimal point indicates range:
0 to 3999

Hz times
constant

Actual frequency monitor
Displays the actual frequency, range
is -400 (-1000) to 400 (1000)
*1
Hz

Hz

Torque command monitor
Displays the torque command, range
is -200 to 200 %

%

Torque bias monitor
Displays the torque bias value, range
is -200 to 200 %

%

Output torque monitor
Displays the output torque, range is
-200 to 200 %

%

Output voltage monitor
Voltage of output to motor,
Range is 0.0 to 600.0V

V

Input power monitor
Displays the input power, range is 0
to 999.9 kW

KW

Watt-hour monitor
Displays watt-hour of the inverter,
range is 0 to 9999000


Elapsed RUN time monitor
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 / 1000 to 9999 /
100 to 999 (10,000 to 99,900)

hours

Elapsed power-on time
monitor
Displays total time the inverter has
been powered up in hours.
Range is 0 to 9999 / 1000 to 9999 /
100 to 999 (10,000 to 99,900)

hours

Heat sink temperature monitor
Temperature of the cooling fin, range
is -20 to 150

C

Life check monitor
Displays the state of lifetime of
electrolytic capacitors on the PWB
and cooling fan.



Program counter monitor
[EzSQ]
Range is 0 to 1024



Program number monitor
[EzSQ]
Range is 0 to 9999



User monitor 0
[EzSQ]
Result of EzSQ execution, range is
–2147483647 to 2147483647



User monitor 1
[EzSQ]
Result of EzSQ execution, range is
–2147483647 to 2147483647



User monitor 2
[EzSQ]
Result of EzSQ execution, range is
–2147483647 to 2147483647


Lifetime expired
Normal
Electrolytic caps
Cooling fan
ON
OFF
Relay 12 11