Hitachi WJ200-001S - Page 53

51
“d” Function
Run
Mode
Edit
Units
Func.
Code
Name
Description

Positioning command monitor
Displays the positioning command,
range is –268435455~+268435455



Current position monitor
Displays the current position, range
is –268435455~+268435455



Dual monitor
Displays two different data
configured in  and .



Inverter mode monitor
Displays currently selected inverter
mode :
I-C: IM CT mode /I-V: IM VT mode
/H-I: IM High frequency mode
/P: PM mode



Trip counter
Number of trip events,
Range is 0. to 65530

events

Trip monitor 1
Displays trip event information:
 Error code
 Output frequency at trip point
 Motor current at trip point
 DC bus voltage at trip point
 Cumulative inverter operation
time at trip point
 Cumulative power-ON time at
trip point



Trip monitor 2



Trip monitor 3



Trip monitor 4



Trip monitor 5



Trip monitor 6



Warning monitor
Displays the warning code



DC bus voltage monitor
Voltage of inverter internal DC bus,
Range is 0.0 to 999.9

V

BRD load ratio monitor
Usage ratio of integrated brake
chopper, range is 0.0 to 100.0%

%

Electronic thermal monitor
Accumulated value of electronic
thermal detection, range is from 0.0
to 100.0%

%
*1
: Up to 1000Hz for high frequency mode (b171 set to 02)