Hitachi WJ200-001S - Page 54

52
Main Profile Parameters
NOTE:. Mark “” in b031=10 shows the accessible parameters when b031 is set “10”, high
level access.
“F” Function
Run
Mode
Edit
Defaults
Func.
Code
Name
Description
Initial data
Units

Output frequency setting
Standard default target frequency
that determines constant motor
speed, range is 0.0 / start
frequency to maximum frequency
(A004)

0.0
Hz

Acceleration time (1)
Standard default acceleration,
range is 0.01 to 3600 sec.

10.0
sec.

Acceleration time (1),
2
nd
motor

10.0
sec.

Deceleration time (1)
Standard default deceleration,
range is 0.01 to 3600 sec.

10.0
sec.

Deceleration time (1),
2
nd
motor

10.0
sec.

Keypad RUN key routing
Two options; select codes:
 Forward
 Reverse

00
