Hitachi WL200 Series

Chapter 5 Wiring, Connecting
11
5.1 Specification of PROFINET connector
Connector type
Description
RJ-45
Screwless type, the flange is with a screw
The Appearance and the wiring are the following.
5.2 Specification of PROFINET cable
If an Ethernet cable of category 5e or higher is used, communications will be possible even if the
cable is not shielded. However, we recommend the following cable to ensure sufficient noise
immunity.
Name
Description
Twisted-pair cable
100BX-TX supported (category 5e or higher)
STP cable (straight or cross allowed)
RJ-45 connector
Category 5e or higher, shielding supported
IN
/OUT
1
8
Pin number
Symbol
Type of signal
1
TD+
Send data+
2
TD-
Send data-
3
RD+
Receive data+
4
－
5
－
6
RD-
Receive data-
7
－
8
－