EasyManuals Logo

Hitachi WL200 Series User Manual

Hitachi WL200 Series
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
Chapter 2 Outline
3
2.1 Outline of product
WJ-PN is an interface option of PROFINET communication for WJ200 / WL200. WJ-PN allows
controlling, monitoring and parameterization of WJ200 / WL200 via the PROFINET network.
PROFINET is an open, digital communication system. PROFINET is anchored in the international
standards IEC 61158 and IEC 61784.
WJ-PN supports the application profile PROFIdrive version 4.2. This profile defines device behavior
and the access procedure to drive data for electric drives on PROFINET or PROFINET.
(1) PROFINET
WJ-PN supports PROFINET IO Ver.2.32.
The conformance class of WJ-PN is B.
(2) Cyclic communication
The PROFINET IO controller manages the PROFINET network, and performs PROFINET IO device
status monitoring and data exchange with the PROFINET IO devices.
The format of communication data conforms to PROFIdrive.
Output data (to PROFINET IO device) : operation command, target value, etc.
Input data (to PROFINET IO controller) : operation status, present value, etc.
(3) Setting the inverter parameters
You can set the inverter parameters by using acyclic communication of the PROFINET.
The procedure to access parameters conforms to PROFIdrive.

Other manuals for Hitachi WL200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi WL200 Series and is the answer not in the manual?

Hitachi WL200 Series Specifications

General IconGeneral
BrandHitachi
ModelWL200 Series
CategoryInverter
LanguageEnglish

Related product manuals