To Next PageTo Next Page
Need help?Do you have a question about the Hitachi WL200 Series and is the answer not in the manual?
General| Series | WL200 |
|---|---|
| Output Frequency | 0 to 400 Hz |
| Overload Capacity | 150% for 60 seconds |
| Protection Functions | Overcurrent, Overvoltage, Undervoltage, Overheat, Short circuit |
| Cooling Method | Fan cooled |
| Communication Interface | RS-485 (Modbus RTU) |
| Operating Temperature | -10 to +50°C (14 to 122°F) |
| Humidity | 5 to 95% RH (non-condensing) |
| Altitude | Up to 1000m (Above sea level) |
| Input Voltage | 3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC |
| Output Voltage | 3-Phase 200 to 240 VAC, 3-Phase 380 to 480 VAC (depending on input voltage) |
