Hitachi WL200 Series

Chapter 8 PROFINET Specification
26
8.5 SNMP
Please refer to following section about the OIDs (Object Identifier) that WJ-PN supports. The
“access” and “type” shall be as follows.
[Access]
Access
Meaning
R
Read only
W
Write only
RW
Read and write
N
Not accessible
[Type]
Data type
Expression in tables
Meaning
Integer
INT*
Singed integer.
“*” indicates bit length.
Octet string
OS[*]
Byte strings.
“*” indicates the number of characters.
No “*” means read only data.
Object identifier
OID
Object identifier
IpAddress
IpAddress
IP address.
This is Octet string has 4 characters.
Counter32
Counter32
From 0 to 4294967295.
Unsigned32
UINT32
From 0 to 4294967295.
Gauge32
Gauge32
From 0 to 4294967295.
TimeTicks
TimeTicks
From 0 to 4294967295.
This indicates the time in hundredths of a
second between two epochs.
Opaque
Opaque
Octet string
Counter64
Counter64
From 0 to 18446744073709551615.