HITEC Eclipse PRO CAR - System Features; Introduction; B) Programmable Features

Table of Contents
Congratulations on your purchase of the Hitec Eclipse Pro Car computer radio.
The Eclipse Pro Car is loaded with many great features to maximize your R/C experience.
Please read this manual carefully to familiarize yourself with the operation of your new
Eclipse Pro Car. After reading this manual, store it in a safe place for future reference.
1. System Features
Introduction
A) Radio Features
- Ergonomically designed 3-channel FM computer radio.
- High definition/multi-pixel LCD display.
- Removable module for easy channel changing. (Spectra capable)
- Dual rate steering. (Adjustable while driving)
- Brake ATL switch. (Adjustable travel length)
- Digital trims.
- Trim center audible verification.
- Third channel "Shifting" switch.
- Third channel "Linear" digital trim.
- Transmitter charging jack for rechargeable batteries.
- RF (Radio Frequency) Indicator light.
- Two-speed menu scrolling.
- Transmitter low battery alarm.
- Total transmitter "On" time timer.
B) Programmable Features
- Model naming. (6 Characters)
- Model select. (20 models)
- Sub-trims.
- Ch #3 switch set. (Shift, Linear)
- EPA. (End Point Adjustment)
- Steering and throttle exponential travel.
- ABS. (Anti-Lock Braking)
- Steering to AUX/Throttle to AUX mixing.
- Timer. (Up/Down)
- Servo reversing.
- Model copy.
- Model reset. (Factory default)
1. System Features
 A. Radio Features
 B. Programmable Features
 C. System Specifications
  1. Transmitter
  2. Receiver
  3. Servo
  4. Charger
  5. Options
  6. Available Versions
2. Transmitter Functions and Operations
 A. Power Switch
 B. LCD Display
 C. Programming Buttons
 D. RF Indicator Light
E. Power Indicator Light
 F. Steering Dual Rate
 G. ATL Switch
 H. Steering and Throttle Trims
 I. Third Channel Linear Adjust
 J. Third Channel (Shift) Switch
 K. Battery Cover
 L. Antenna
 M. Charging Jack
 N. Steering Stick
 O. Throttle Stick
 P. Module
3. Transmitter Battery Installation
4. Recharging Batteries
5. Receiver Servo Connections
 A. Receiver
 B. Servos
 C. Battery
6. Main Edit Mode
 A. Entering the Main Edit Mode
 B. Model Naming
 C. Model Copy
 D. Model Reset
 E. Servo Reversing
 F. Timer
 G. 3rd Channel Switch Select
 H. Exit
7. Programming Mode
 A. Model Select
 B. Sub-Trims
 C. EPA (End Point Adjustment)
 D. Exponential
 E. ABS (Anti-Lock Braking)
 F. Mixing
8. Troubleshooting Guide
9. Warnings
10. Racers Tips
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 14
Page 13
Page 15