HITEC RDX 2 PRO - Operational Warnings and Alerts; Mode Conflict and Overheating Warnings; Battery Balance and Full Charge Alerts

33
The internal temperature of the unit goes too high.
The battery capacity is more than the maximum
capacity which the user has set.
The charging time is longer than the maximum
charging time which the user has set.
The battery voltage is higher than the maximum voltage which the
user sets when charging in balance mode.
Charging is disabled if the charger entered into DC power supply mode.
The voltage dierence is higher than 300mV between the highest and the lowest one.
Warning and Error Messages
A
A
A
INT. TEMP. TOO HI
OVER TIME LIMIT
BATTERY WAS FULL
A
DC MODE DISAGREE
CHARGE
A
BLANCE VOLT DIFF
TOO HIGH
A
OVER CHARGE
CAPACITY LIMIT