Version 1.0, 05/2013. Copyright 2012 Hitron Technologies
13
Version 1.0, 05/2013. Copyright 2013 Hitron Technologies
13
Hitron CDA-RES User’s Guide
Table 2: Hardware Connections
Reset Use this button to reboot or reset your CDA-RES.
Press the button and hold it for less than five seconds
to reboot the CDA-RES. The CDA-RES restarts,
using your existing settings.
Press the button and hold it for more than five
seconds to delete all user-configured settings and
restart the CDA-RES using its factory default
settings. See Resetting the CDA-RES on page 21 for
more information on resetting the CDA-RES.
NOTE: Unless you previously backed-up the CDA-
RES’s configuration settings prior to resetting the
CDA-RES, the settings cannot be recovered.
LAN Use these ports to connect your computers and other
network devices, using Category 5 or 6 Ethernet cables
with RJ45 connectors.
To Next Page
Loading...
