Hitron CDA-RES - Logging into the CDA-RES GUI

Version 1.0, 05/2013. Copyright 2012 Hitron Technologies
19
Version 1.0, 05/2013. Copyright 2013 Hitron Technologies
19
Hitron CDA-RES User’s Guide
3
Right-click your network connection (usually Local Area Connection) and click
Properties.
4 In the General tab’s This connection uses the following items list, scroll
down and select Internet Protocol (TCP/IP). Click Properties.
5 You can get an IP address automatically, or specify one manually:
If your CDA-RES’s DHCP server is active, select Get an IP address
automatically.
If your CDA-RES’s DHCP server is active, select Use the following IP
address. In the IP address field, enter a value between 192.168.100.2 and
192.168.100.254 (default). In the Subnet mask field, enter 255.255.255.0
(default).
NOTE: If your CDA-RES is not using the default IP address, enter an IP address and
subnet mask that places your computer in the same subnet as the CDA-RES.
6 Click OK. The Internet Protocol (TCP/IP) window closes. In the Local Area
Connection Properties window, click OK.
Your computer now obtains an IP address from the CDA-RES, or uses the IP address
that you specified, and can communicate with the CDA-RES.
1.5 Login to the CDA-RES
Take the following steps to login to the CDA-RES’s GUI.
1 Open a browser window.
2 Enter the CDA-RES’s IP address (default 192.168.100.1) in the URL bar. The
Login screen displays.