Version 1.0, 05/2013. Copyright 2012 Hitron Technologies
33
Version 1.0, 05/2013. Copyright 2013 Hitron Technologies
33
Hitron CDA-RES User’s Guide
4
Initialization
This chapter describes the screens that display when you click Initialization in the
toolbar. It contains the following sections:
Initialization Overview on page 33
The Initialization Screen on page 33
4.1 Initialization Overview
Use the Initialization screen for troubleshooting purposes to ensure that the CDA-RES
has successfully connected to the Internet; if an error has occurred you can identify the
stage at which the failure occurred.
NOTE: This screen displays when you first log in to the CDA-RES.
4.2 The Initialization Screen
This screen displays the steps successfully taken to connect to the Internet over the
CABLE connection.
Click Cable > Initialization. The following screen displays.