Version 1.0, 05/2013. Copyright 2012 Hitron Technologies
22
Version 1.0, 05/2013. Copyright 2013 Hitron Technologies
22
Hitron CDA-RES User’s Guide
Press the RESET button on the CDA-RES, and hold it in for ten seconds or
longer.
The CDA-RES turns off and on again, using its factory default settings.
NOTE: Depending on your CDA-RES’s previous configuration, you may need to re-
configure your computer’s IP settings; see The Status LEDs light up as soon
as there is activity on the port IP Address Setup on page 17.
To Next Page
Loading...
