Version 1.1, 09/2020. Copyright 2012 Hitron Technologies
108
Version 1.1, 09/2020. Copyright 2020 Hitron Technologies
108
Hitron CODA-551x User’s Guide
Protocol Use this field to specify whether the CODA-551x should
filter via:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Both TCP and UDP (TCP/UDP)
Port Range This displays the start and end port for which this
blocking rule applies.
Local IP/CIDR Use this field to enter a specific IP address or any IP
address from the Local to the inbound filter rule.
Select Any for any IP address from the LAN.
Select Specific to add an IP address for the rule.
Remote IP/CIDR Use this field to enter a specific IP address or any IP
address on the WAN(Remote) to the inbound filter rule.
Select Any for any IP address from the WAN.
Select Specific to add an IP address for the rule.
Rule Status Use this field to select whether the filtering rule should
be active or not.
Select ON to activate the rule. Matching traffic will
be blocked.
Select OFF to deactivate the rule. Matching traffic
will not be blocked.
Managed Services
Filter Enabled Use this field to turn port blocking on or off.
Select Enabled to turn port blocking on.
Select Disabled to turn port blocking off.
Application Name This displays the name you assigned to the blocking
rule when you created it.
Protocol This field displays the protocol or protocols to which this
filtering rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
Port Range This displays the start and end port for which this
blocking rule applies.
Table 36: The Security: Port Blocking Screen (continued)
To Next Page
Loading...
Need help?
General
