Hitron CODA User Manual

13
Chapter 3 Connecting to the Internet
For information about how to reboot your cable modem, see the next
two pages.
Perform a Speed Test
To determine your accurate Internet speed, please visit the speed test
website of your cable Internet provider and perform a speed test.
If your actual speed is lower than your subscribed speed, you should
contact your cable Internet provider.
Connect your Cable Modem to a Router After Installation
and Activation
During the installation and activation, you must connect the cable
modem directly to a computer. But after installation and activation,
you can connect the cable modem to a router.
Figure 6:. Connect your CODA cable modem to a router
Coax
Ethernet Power


Hitron CODA Specifications

General

DOCSIS	3.1
Downstream Channels	32
Upstream Channels	8
Ethernet Ports	2
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 158°F (-20°C to 70°C)
Humidity	non-condensing