INTRODUCTION
Version 1.0, 04/2015. Copyright 2012 Hitron Technologies
15
Version 1.0, 04/2015. Copyright 2015 Hitron Technologies
15
Hitron HT-EMN2 User’s Guide
MoCA Off The CABLE port is not connected to a coax socket,
or the CABLE port is connected to a coax socket,
but no other MoCA device has been detected on
the coax network.
Blue, steady Another MoCA device has been detected on the
coax network, and the HT-EMN2 has successfully
made a connection.
Blue, blinking Data is being transferred to or from the HT-EMN2
over the coax network.
LAN Off No device is connected to one of the LAN ports.
Green, blinking A device is connected to one of the LAN ports via a
Fast Ethernet (10/100Mbps) link, and is transmitting
or receiving data.
Green, steady A device is connected to one of the LAN ports via a
Fast Ethernet (10/100Mbps) link, but is not
transmitting or receiving data.
Blue, blinking A device is connected to one of the LAN ports via a
Gigabit Ethernet (1000Mbps) link, and is
transmitting or receiving data.
Blue, steady A device is connected to one of the LAN ports via a
Gigabit Ethernet (1000Mbps) link, but is not
transmitting or receiving data.
2.4G WiFi Off The 2.4G wireless network is not enabled.
Green, steady The 2.4G wireless network is enabled, and no data
is being transmitted or received over the wireless
network.
Green, blinking The 2.4G wireless network is enabled, and data is
being transmitted or received over the wireless
network.
5G WiFi Off The 5G wireless network is not enabled.
Green, steady The 5G wireless network is enabled, and no data is
being transmitted or received over the wireless
network.
Green, blinking The 5G wireless network is enabled, and data is
being transmitted or received over the wireless
network.
Table 3: LEDs
To Next Page
Loading...
Need help?
General