Hitron HT-EMN2 - Table 6: the 2.4 G Wireless Settings: Basic Screen

2.4G WIRELESS SETTINGS
Version 1.0, 04/2015. Copyright 2012 Hitron Technologies
28
Version 1.0, 04/2015. Copyright 2015 Hitron Technologies
28
Hitron HT-EMN2 User’s Guide
Figure 6: The 2.4G Wireless Settings: Basic Screen
The following table describes the labels in this screen.
Table 6: The 2.4G Wireless Settings: Basic Screen
Wireless Network
Radio On/Off Use this field to turn the 2.4GHz wireless network on or
off.
Network Mode Select the type of wireless network that you want to use:
802.11 b/g Mixed: use IEEE 802.11b and 802.11g
802.11 11b Only: use IEEE 802.11b
802.11 11g Only: use IEEE 802.11g
802.11 b/g/n Mixed: use IEEE 802.11b, 802.11g
and 802.11n
802.11 11n Only: use IEEE 802.11n
802.11 g/n Mixed: use IEEE 802.11g and 802.11n
Only wireless clients that support the network protocol
you select can connect to the wireless network. If in
doubt, use 11b/g/n (default).