Hitron HT-EMN2 - GUI Overview

INTRODUCTION
Version 1.0, 04/2015. Copyright 2012 Hitron Technologies
18
Version 1.0, 04/2015. Copyright 2015 Hitron Technologies
18
Hitron HT-EMN2 User’s Guide
NOTE: You can login to the HT-EMN2’s GUI via the wireless interface. However, it is
strongly recommended that you configure the HT-EMN2 via a wired
connection on the LAN.
1 Open a browser window.
2 Enter the HT-EMN2’s IP address (default 192.168.0.254) in the URL bar. The
Login screen displays.
3 Enter the Username and Password. The default login username is cusadmin,
and the default password is password.
NOTE: The Username and Password are case-sensitive; “password” is not the same
as “Password”.
4 Select the Language, if required. By default, the HT-EMN2’s interface displays
in English.
5 If you want to login without entering the password, select Remember me on
this computer. Only select this on your own, private computer (not public
computers, or those easily-accessible by others).
6 Click Login. The System Information screen displays (see The System
Information Screen on page 22).
1.6 GUI Overview
This section describes the HT-EMN2’s GUI.