INTRODUCTION
Version 1.0, 04/2015. Copyright 2012 Hitron Technologies
21
Version 1.0, 04/2015. Copyright 2015 Hitron Technologies
21
Hitron HT-EMN2 User’s Guide
status mac This displays the MAC address of the HT-EMN2.
Local Network Link Info
Link State This displays the link status of the HT-EMN2’s local
network.
Link Duplex This displays the link duplex of the HT-EMN2’s local
network.
Link Speed This displays the link speed of the HT-EMN2’s local
network.
Wireless Network
MAC Address This displays the Media Access Control (MAC) address of
each network device connected on the wireless network.
Aid This displays the wireless hearing aid solution on the
wireless network.
PSM This displays the power saving mode on the wireless
network.
MimoPS This displays the Multiple-Input, Multiple-Output (MIMO)
power save mode
on the wireless network.
MCS This displays the modulation and coding scheme on the
wireless network.
BW This displays the bandwidth on the wireless network.
SGI This displays the short guard interval on the wireless
network.
STBC This displays the space-time block codes on the wireless
network.
Auto SYNC Click this to turn the auto sync on or off.
Reboot/ Factory Reset
Reboot Click this to restart your HT-EMN2.
Factory Reset
Click this to return your CGNVM to its factory default
settings.
NOTE: When you do this, all your user-configured
settings are lost, and cannot be retrieved.
Table 5: The HT-EMN2: Summary Screen (continued)
To Next Page
Loading...
Need help?
General