1. Handlebar Assembly
8. Stand up the foldable
standpipe, and buckle the
standpipe with the handle of
the folding buckle upwards.
3. Open the folding
riser and quickly
release it, and install
the telescopic riser
into the folding riser in
the direction of the
arrow in the picture.
4. Adjust the
telescopic standpipe
to a moderate position,
tighten the quick
release nut, and
buckle the quick
release.
1. Open the folding
buckle of the seat
tube, and insert the
seat tube into the
front fork tube of the
head tube along
the direction of the
arrow.
2. After inserting the folding
riser, lock the riser slightly
according to the arrow
direction in the figure.
5. Stand up
the folded
riser in the
direction of
the arrow in
the picture.
6. Adjust the
handlebars
parallel to
the fork.
7. Put down the
folding riser, and
lock the screw
in the direction of
the arrow in the
picture.
9. Fasten the handle of the folding buckle in
the direction of the arrow in the picture.
The folding riser is assembled.
10. Open the quick release
buckle of the riser, adjust
the telescopic riser to an
appropriate height, tighten
the nut and buckle the
quick release handle in the
direction of the arrow in
the picture.
The telescoping riser is
assembled.
Note: If the quick release
handle is too loose or too
tight to be pressed, please
adjust the tightness of the
nut properly.
Deutsch / English / Français / Español / Italiano / Nederlands / Polski
-55-
To Next Page
