41
Here are some detailed description under setting and action page for e-series.
Setting page:
Action page:
Choose correspond gripper
station, gripper type and
connect.
Busy：The busy signal happens when gripper is executing the program.
Pos：The pos signal happens when gripper executes MOVE command and moves to
position exactly.
Hold：When the gripper exactly grips the object, then the hold signal will show up.
Alarm：The alarm signal happens when error shows up during gripper operation.
Position：Gripper absolute position or relative size of the clamped object.
Move: moving with position control, used to move the gripper quickly.
To Next Page
Loading...