What to do if the HMF HMF-IRC Farm Equipment RCL controller is set for emergency operation?
If the RCL controller has been set for emergency operation, switch it back to remote control mode. Refer to the Emergency Operation chapter for detailed instructions.
What to do if there is a start up error in the Can-bus communication in my HMF HMF-IRC Farm Equipment?
If there's a start-up error in the Can-bus communication, restart the IRC-System.
Explains how the IRC system transmits signals from the remote control box to the electronic box and valve block.
Details the layout and functions of buttons, levers, and indicators on the remote control box.
Describes the electronic box, its connections, and the function of its status indicator diodes.
Covers the rechargeable batteries for the remote control box, their replacement, charging, and care.
Explains the optional remote control cable for wired connection and its use in case of radio communication failure.
Details the process of choosing and testing frequencies for reliable radio communication during system startup.
Guides the startup procedure using the RCL indicator panel, including connecting the pump and activating the system.
Details the step-by-step procedure for starting up the IRC-System from the remote control box.
Provides an alternative startup method for the RCL/IRC-system directly from the remote control box.
Explains the proportional activation of the HDL-system for adjusted loader speed and load moment control.
Describes how to reduce loader working speed for precise positioning tasks using the HDL-system.
General| Brand | HMF |
|---|---|
| Model | HMF-IRC |
| Category | Farm Equipment |
| Language | English |
To Next Page