HMF HMF-IRC - Page 15

HMF-IRC Instruction Manual - GB
01-01 HMF TECHNICAL SERVICE DEP.
14
If you require the 7
th
or 8
th
loader function to be activated permanently, carry out
as follows:
• Push the left tumbler switch to the left (opt. 2).
• Hold down the left press button (A) or the right press button (B) while
pushing the left tumbler switch into central position again.
Now the “grab”- or “rotator”-function is a direct function in the 6
th
control lever.
By repeating the procedure, the functions of the control levers are changed
back to their original functions.