OPTIONS
Service +49(0)391 2514666 02/2017 Instruction Manual HMP LFGpro – en
Thermal printer AP1300
Included in the Light Weight Deflectometer scope of supply is a thermal printer
AP1300 (optional).
Power Supply
The printer can be operated independently from a power supply unit and is
powered by a 1.8 Ah NiMH power pack housed in the printer (Figure 34).
Thus, the printer can be carried from job to job.
Safety
❙
The NiMH power pack is provided with an internal fuse unit.
However, a short-circuit may occur when the NiMH power pack
gets into contact with metallic items.
❙
The power pack must not be opened; otherwise it may leak out or a
short-circuit may occur.
❙
Before you remove or replace the power pack, disconnect it from
the external power pack charger.
The power pack has to be charged only by means of the supplied power pack
charger. The power pack charger can be connected with a car-battery 12–24V
or by means of an AC/DC adapter to mains 230 V / 50 Hz. The AC/DC adapter
is included in the delivery contents of Settlement measuring instrument
HMP LFGpro. Charger and adapter are placed in the carrying case.
The printer AP1300 is shipped with a connected and fully loaded power pack.
❙
When the printer is used for the first time after a lengthy period or
has been standing idle for a lengthy period, recharge the power
pack prior to use.
❙
In the event of malfunction the printer may only be opened by
authorised personnel.
❙
The supplied accessories must only be used for devices supplied
by HMP and according to this instruction manual. Any other use
may cause damages.
Charging of Power Pack
❙
For Changing the power pack it is only allowed to use the supplied
power pack charger.
❙
Fully charging the power pack takes 15 hours at most.
❙
Use the power pack charger only indoors. Disconnect the device
from the mains if it is not used. Do not operate the device in case of
damage to the housing or the mains plug.
❙
Only charge nickel/metal hydride power packs; use of the charger
for other batteries may cause an explosion hazard.
❙
Do not open the power pack charger.
To Next Page
Loading...
