Hobart FX series Operation Instructions

AG-21427-C-03-08 13
DE
GB
F
NL
9.4 CYCLE COUNTER
Push Program button
➁
again.
The display will show alternately "P" or the number of wash cycles.
In the lower Display
➃
appears the value up to 999.
Thousands will be shown in the upper Display ➄.
Example: 1023 wash cycles
Max. indication:
999 999
9.5 WATER CONSUMPTION COUNTER
Push Program button
➁
again.
The display will show alternately "E" or the water consumption (liter).
In the lower Display
➃
appears the value up to 999 liter.
Thousands will be shown in the upper Display
➄
.
Example: 10217 liter
Max. indication:
999 999
9.6 REMAINING WATER QUANTITY COUNTER
FOR EXTERNAL WATER TREATMENT
Only available if activated in service mode (S18). The capacity
(liter) of the water treatment has to be stored via C79/80.
Push Program button
➁
again.
The display will show alternately "d" and/or the remaining water quantity
(liter).
In the lower Display
➃
appears the value up to 999 liter.
Thousands will be shown in the upper Display
➄
.
Example: 1586 liter
Max. indication:
999 999
To reset the counter to pre-set value, push and hold (3 seconds) the
ON/OFF button
➀
.
9.7 TERMINATION OF SETTING MODE OR
COUNTER DISPLAY
Close the door, open and close it again or do not press any
button for 10 seconds.
–
–
–
–
–
–
SETTINGS AND COUNTER VALUES

Hobart FX series Specifications

General

Brand	Hobart
Model	FX series
Category	Dishwasher
Language	English