EasyManua.ls Logo

Hobart FX series - Chemical Sensor Start-Up

Hobart FX series
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AG-21427-C-03-08 9
DE
GB
F
NL
Place glasses and cups face downwards into the rack.
Remove any food debris before loading plates into rack.
Spray off greasy food soil.
5.2 RUN
Put rack into the machine and close the door.
Push the ON/OFF button
. During the wash cycle is running, the
button illuminates blue.
As soon as the ON/OFF button
changes to green light, the wash
cycle is finished.
Open the door and take out rack.
Allow dishes to dry for 1 minute approx.
SELECT PROGRAM:
The machine is operating automatically with standard cycle time.
If needed, it is possible to select a shorter or longer program.
To show the present program, push the Program button
before
starting the wash cycle.
To change the program, push the Program button again.
P01 = Short cycle (for light / medium soiled dishes and
glassware)
P02 = Standard cycle (for medium / heavy soiled dishes)
P03 = Long cycle (for dried on soiling and containers)
The machine continues with the chosen cycle time until it is switched
off or another program is chosen.
OPERATION

Other manuals for Hobart FX series

Related product manuals