Hobart Inventor Series User Manual

OM-281997 Page 10
SECTION 4 – OPERATION
4-1. Helmet Controls
OM-281997 Page 2
SECTION 10 OPERATING INSTRUCTIONS
10-1. Helmet Controls
421 53
6
10-2. Low Battery Indicator
1
F
Remove protective films
from lens before
welding.
1 Low Battery Indicator (See
Section 4-2)
2 Variable Shade Control
(See Section 4-4)
3 Sensitivity Control (See
Section 4-5)
4 Lens Delay Control (See
Section 4-3)
5 Weld/Grind Mode Switch
(See Section 4-6)
6 Grind Mode Indicator (See
Section 4-6)

Hobart Inventor Series Specifications

General

Brand	Hobart
Model	Inventor Series
Category	Welding Accessories
Language	English