OM-281997 Page 21
SECTION 9 – MAINTENANCE AND
TROUBLESHOOTING
9-1. Maintenance And Storage
F
Do not use solvents or abrasive cleaning detergents to clean the helmet. Do not im-
merse the lens assembly in water.
F
Keep helmet dry; do not expose helmet to rain or snow. Keep helmet away from fire and
other sources of heat.
F
The auto-darkening lens uses sensitive electronics. Do not drop helmet or handle it in a
rough manner.
The helmet requires little maintenance. However, for best performance clean helmet after
each use. Using a soft cloth dampened with a mild soap and water solution, wipe the cover
lenses clean. Allow to air dry. Occasionally, the filter lens and sensors should be cleaned by
gently wiping with a soft, dry cloth.
Store helmet in a clean, dry, cool place free of solvent-based vapors. To prevent battery from
losing power, store helmet in helmet bag or in a dark location. Remove battery(s) if helmet will
be stored longer than six months.
End Of Useful Life
The welding helmet has no expiration date, and with proper care and maintenance it can pro-
vide many years of eye and face protection. The helmet can continue to be used, provided
that the helmet shell/shroud is undamaged (no cracks, gaps, or holes) and the lens functions
normally (switches from a light state to a dark state.)
To Next Page
Loading...
Need help?
General
