Hobby Siesta - Page 117

7. Electrical Installations116
Themobilehome'senginemustbeturnedobeforethe
230Vmainsconnectionishookedup.
OnlyplugsandcordsthatcomplywithCEEstandards
may be used.
To disconnect the electric connection:
• Switchotheautomaticcircuitbreaker
j
bypressingthe
rockerswitchdown
k
.
•RemovetheCEEplug
m
.
• Pressthecoverap
k
oftheexternalsocketdownuntilit
clicksintoplace.
Supply via mains connection
Themobilehomeisconnectedtotheexternal230Vmains
byaCEEfeederplug
j
located in the side wall.
To connect the CEE feeder plug
• Switchotheautomaticcircuitbreaker
j
(p.117)bypres-
singtherockerswitch
k
down(p.117).
• Flipupthecoverapoftheexternalsocket
k
(see41).
•Completelyunwindtheconnectorcable.
•OpenthecapoftheCEEconnectorplug
l
bypullingitupina
90°angle.
•Inserttheplug
m
untilitlocksintoplace.
• Switchtheautomaticcircuitbreaker
j
(p.117)backon.
4
1
2
3
Connected 230V feeder plug