Hobby Siesta - Seating Arrangements and Sleeping Areas

6. Interior Structure60
6.4 Seating arrangements and sleeping areas
The seating arrangements can be converted to beds.
Conversion (only alcove models)
• Remove the seat and back cushions.
• Undo the lock
j
on the bed expansion.
• Place the outer plank
k
of the bed expansion on the oor.
• Raise the inner plank
l
approx. 15° above the horizontal
position.
• Wedge the outer plank
k
in a 45° angle (approx.) beneath
the inner plank
l
to support it.
• Place the cushions on the bed according to the following
diagrams.
1
2
3
3
Converting the Transverse Seat (only Optima)
In order to use the additional bed in the rear, the transverse
seat must be converted.
Conversion
• Remove the seat and back cushions.
• Lower the table (to do this, the lower table top must be
swung out).
• Fold the cushion cover
j
forward by 180° and place it on
the table.
1
2
Widening the seating bench
Transverse Seat