EasyManua.ls Logo

Hobby Siesta - Skylight

Hobby Siesta
229 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. Interior Structure76
Closing
• Turn the crank counter-clockwise until the light is closed
and you feel the resistance. The control pin
j
is visible
when the skylight is shut. Then turn the crank only so far
until you can fold it into the crank bag. To be locked secu-
rely, the crank must be folded into the crank bag.
Large roof bonnet
Opening
Reach into the opening of the crank bag and fold the crank
to the user position by pulling it out. Turn the crank clock-
wise to open the light to the desired position. When you
have reached the maximum opening angle you will feel the
resistance.
6.9 Skylight
Safety instructions
Never open the skylight in strong winds/rain/hail, etc. or
if the temperature outside is below -20°C!
Do not use force to open the roof skylight when covered
by ice or snow as this could break the hinges and opening
mechanism.
Remove snow, ice or excessive dirt before opening.
Ensure there is sucient room before opening the
skylight under trees, in garages, etc.
Do not stand on the skylight.
Close and bolt the skylight before driving. Open the
insect screen and pleated material (resting position).
If the sunlight is very strong, pull the sunshade only 3/4
closed, otherwise there is a danger of heat build-up.
The vents for ventilation must always remain open! Never
shut or cover up these vents!
1
Large roof bonnet
Before opening the light, ensure that the area above the
opening of the light is free. The light can be opened to an
angle of 60°.
Large roof bonnet
Control pin

Table of Contents

Related product manuals