5. Exterior Structure
44
5.5 Rear ladder *
The rear ladder is used to ascend to the roof of the mobile
home, e.g. to load the roof rail.
A lock on the lower part of the rear ladder prevents it from
being unfolded unintentionally.
To unfold
• Turn the key 90° clockwise. The locking pin will project
slightly.
• Unfold the ladder until the feet are securely on the ground.
• Turn the key back and remove it.
Rear ladder
Levelling supports, folded out
Retracting levelling supports
• Use crank to release levelling supports.
• Continue to crank smoothly until the levelling support is once
again in its initial horizontal position.
- Do not use the levelling supports as a car jack. Their sole
purpose is to stabilise the motor home when it is parked.
- Always load the levelling supports evenly (max. 500 kg per
support).
- Always retract the levelling supports and secure them
before driving.
- Clean the levelling supports regularly and grease them slightly.
The telescopically adjustable foot may only be extended
as far as the yellow marking!
To Next Page
Loading...
