Gas regulator with a crash sensor *
Using the MonoControl CS and DuoControl CS, it is possible
to heat the vehicle even while driving.
Should there be an accident, the integrated crash sensor
automatically interrupts the gas supply, thereby preventing
gas from escaping.
(Eect of delay 3.5 g ± 0.5 g; this corresponds to an impact
speed of 15-20 km/h against a xed obstacle.)
To operate
j
Open the valve on the bottle.
k
Press rmly on the hose rupture protection (green button)
on the high-pressure hose.
l
If necessary (e.g. after it has been newly mounted or
the gas bottle accidentally hits against the gas pressure
regulator system) press the green reset button on the
MonoControl CS (resets the crash sensor activation
element).
1
2
3
Diagram of crash sensor
To Next Page
Loading...
