9. Gas 151
External socket for gas *
The external socket for gas is used to connect external gas
devices such as a gas barbecue or lamp.
The plug connection can only be hitched when the emer-
gency shuto valve has been closed. Push back the clutch
sleeve to undo the safety latch.
The operating pressure of the device to be connected
must be 30 mbar (1 bar = 14.5 PSI). Maximum perfor-
mance of devices to be connected: 1.5 kW
The external socket for gas is only suitable for extracting
gas, not for supplying gas to the system.
The coupling valve has been constructed in such a way that
the emergency shuto valve can only be opened if a gas hose
has been attached. When hitching, the plug connection is
plugged into the safety coupling.
If no gas hose has been attached, always use the protective
cap to shut the opening of the valve.
External gas socket
To Next Page
Loading...
