10. Built-in devices 171
Heating with electricity
Use the following procedure to activate the "Heating with elec-
tricity" function. The higher the selected output, the faster the
camper will heat up.
If electricity and gas are selected together, you can set whether
gas or electricity is to take priority (see Tools menu). The boi-
ler uses no higher output than is required, even if 3 kW has
been selected.
1. Starting and changing the dierent heating levels step by
step (O, 1 kW, 2 kW or 3 kW) with "+" or "-". The value
set will be displayed on the screen. When activated, the
plus icon is shown in green.
2. To switch o the electric heating operation, keep pressing
the "-" key until you reach O.
Heating with gas
To activate heating with gas:
If electricity and gas are selected together, you can set whether
gas or electricity is to take priority (see Tools menu).
1.
Start gas operation by pressing on the liquid gas ame.
The icon for liquid gas is activated and turns green.
2. To switch o gas operation, press the liquid gas ame.
The icon is now blue.
To Next Page
Loading...
