Hobby Siesta - Page 192

12. Maintenance and Care 191
Optima with Premium rear end
*
The following is a description of how to change the bulbs in
the direction indicator (blinker) and rear lights.
The rear lights in the Premium rear end (optional extra) are
ttedwithLEDlights,wherebyeachindividuallighthasa
standardised alignment. Individual LED lamps may there-
fore of approving technical reasons not be replaced with a
defect , the complete taillight must be replaced.
2
1
3
4
Rear light
Cover
Unscrewing the screws
Light bulbs
•Tochangethebulbs:startby
carefully removing the cover
j
at the indicated place
k
by
clipping it out of the retainer.
Rear light with LED
• Thenunscrewthe3screws
l
in
order to remove the rear light and
expose the bulbs.
•
Simplyunscrewthedefectbulb
m
from the socket and replace it.
• Carryoutthisprocedureinreverse
to put everything back in place.