6. Interior Structure 63
Seat cushion
Head rest
Seat cushion
Back cushion
Additional cushion
Rearranging the cushions in the Siesta model
1. Hook the table into the lower guiding rail (see 6.3 Tables).
2. Fold up the side elements of the seating benches.
3. Place the plywood panel over the side elements. Use the
additional mounting foot to support the panel in the middle.
4. Place the additional cushion on the table top.
5. Place the additional cushion on the plywood panel.
Back cushion
Head rest
Additional cushion
To Next Page
Loading...
