10
HOBIE 15 CLUB MAST SET UP
Locate de Teflon chip (mast pivot bearing) and
push it down into the mast step casting on the
front crossbar.
5
Lay the mast on top of the boat with the sail
track to the bottom and the mast base toward
the bows.
NB : place padding under the mast to prevent
scratching.
6
Make sure that the rigging wires are not twisted.
Attach the shrouds to the top hole of the side stay
adjusters. Leave the trapeze wires loose at this stage.
7
Attach the head of the jib sail to the shackle underneath the
pigtail swivel. Tighten securely.
NB : The forestay is also attached to this shackle.
8
To Next Page
Loading...
Need help?
General
