Holset HX25 - 5: Turbocharger Service and Overhaul; Service Tools

HX25/25W/27W Service Repair Manual Turbocharger Service and Overhaul
Service Tools
5:1
The following special tools are recommended to perform procedures in this manual. The use of these tools is
shown in the appropriate procedure. These tools can be purchased from your local Authorised Repair Location.
Part No. Tool Description Tool Illustration
Torque Wrench
Dial Gauge and Dial Gauge Adaptor
-0+
10
10
20
20
30
30
40
40
50
MERCER
TYPE 20
Pressure Gauge Regulated Air Supply
Max 300 kPa (45 lbf/in
2
)
Caution
All Service and Maintenance settings are shown in Holset’s Service Data Sheet. It is essential that these
settings are used. Common tools found in mechanic’s tool box not included.