Visually inspect all parts to detect signs of burning and
other fault conditions in order to obtain as much
information as possible before washing.
HX25/25W/27W Service Repair Manual Turbocharger Service and Overhaul
Component Cleaning
5:6
Soak the components in a non-corrosive low flash point
metal cleaner to loosen deposits.
Dry the components using compressed air.
Protect the sliding surfaces of the cleaned parts against
corrosion by applying clean engine oil.
Scale like deposits, if any, must be removed by using a
non metallic bristle brush. After loosening the deposits
with the brush, wash and dry components as above.
Warning
Always wear safety glasses during cleaning.
Warning
Always wear safety glasses during cleaning.
Warning
Always wear safety glasses during cleaning.
To Next Page
Loading...