Holtkamp SunCash - Chip Card Types; Programming; Programming Positions Overview

Holtkamp Electronics SUNCASH engl. techn. Stand 04.2016 4047_04.2016 V09.2019
- 14 -
12 Chip card types
There are various chip card types for customers as a means of
payment. Further for the programming of standard and special
functions various service and enquiry cards.
Inthefollowingtableyouwillndanexplanatorylistofthetype
of available chip cards.
Chip card type
PIN-CARD
Function
P11 revaluable chip card for customer
P33 Chip card for querying the statistics and deleting the daily counters
(forowner/sta󰀨)
P43 Chip card for querying and deleting the statistics (Exclusively for the owner / Caution: Danger of manipulation!)
P53 Menu programming chip card (Exclusively for the owner / Caution: Danger of manipulation!)
P73 Chip card for activating the initialization function (forowner/sta󰀨/Caution:Dangerofmanipulation!)
13 Programming
13.1 Explaning the programming positions
IntheprogrammingmodetheSunCashhasthreedi󰀨erentpro-
gramming menus: the Conguration menu, the Bonus menu
and the Card initialisation menu. With the help of the key pad
on the SunCash and the appropriate chip cards, you can move
about the menus as follows.
Through pressing the RESET button, the adjusting value is re-
duced, through pressing the PLUS button, the adjusting value
is increased. Through pressing the OK button you change to the
next programming step. The menu is left and the card rejected,
when the menu has been completed.
Which program position in which menu is to be found and what
they mean is explained as follows.
It will always be declared, that DIP switch Nr. 3 must be
set at on for programming. The DIP switch should also
stay at this position after the programming.
13.1.1 Congurationmenu
Thecongurations menuo󰀨ersyouthe possibilitytodoallthe
programming concerning the values for the hopper, coin tester
and bank note reader in this menu.
Thevalueadjustmentstaketherstprogrampositions.Thevalu-
eso󰀨ersyouthepossibility,thevalueoftheinsertedorpaying
out coins or notes for the SunCash to be set individually. They
are already factory set and on the installed coin tester/bank note
reader adjusted and may only be changed in the following cases:
● If a coin/bank note tester for foreign currency has been in-
stalled later.
Only possible after consultation with Holtkamp.
● If the value of the token is to be changed.
● If one or more kinds of coins or notes are to be banned.
● Ifotherkindsofcoinsaretobeusedwhenllingupthe
hopper.
Only possible after consultation Holtkamp.

Your SunCash is tted with an electronic multiple coin tester
(EMP) and a bank note reader. Because of this it can read and
accept six di󰀨erent coins and notes. Should a coin or note be
paid in, it notes just the insert, do not know yet which value the
coin or note has for your SunCash. This evaluation is achieved
with the help of the channel value program.
haben soll. Diese Wertzuschreibung erfolgt mit Hilfe der Pro-
grammierung der Kanalwertigkeiten.

