APP OPERATION INSTRUCTION
Follow Me
When the Follow Me function is enabled, the drone will track your
movement by following the GPS signal on your mobile phone. (Before
using this function, please make sure that the connection between the
drone and the transmitter is strong and stable.)
1. Ensure the drone's flight range is within 16~98 ft.
2. Tap the ” ” icon first, then select the ” ” icon, and follow the
instructions in the prompt box to enter the Follow Me function — the
drone will now follow the mobile phone’s coordinates.
3. To exit Follow Me Mode, simply tap the ” ” icon on the app
interface again.
· The Follow me function can only be used if the flight range is
within 16~98 ft.
· The Follow me function may be difficult to activate if the mobile
phone’s GPS signal is too weak. This could be caused by signal
interference from surrounding buildings, trees, mobile network
congestion, etc.
· Please use Follow Me function in an open area and be mindful of
your surroundings. The drone is NOT equipped with obstacle
avoidance.
To Next Page
Loading...
