Holzstar TKS 316 E - Table of Contents

2 TKS 316 E | Version 1.02
Imprint
Product identification
Table saw Item number
TKS 316 E - 230V 5902316
TKS 316 E - 400V 5902317
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax: 0049 (0) 951 96555 - 55
E-Mail: info@holzstar.de
Internet: www.holzstar.de
Indications regarding the operating instructions
Original operating instructions
Edition: 28.08.2019
Version: 1.02
Language: English
Author: FL
Indications regarding the copyright
Copyright © 2019 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these operating instructions is the sole
property of the company Stürmer Maschinen GmbH.
Passing on as well as copying of this document, the use
and distribution of its content are prohibited if not explic-
itly permitted. Contraventions are liable to compensa-
tion.
Subject to technical modifications and error.
Contents
1 Introduction ............................................. 3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Limitation of liability............................................. 3
2 Safety ....................................................... 3
2.1 Symbol explanation ............................................ 3
2.2 Personal protective equipment ........................... 4
2.3 Responsibility of the Operator ............................ 4
2.4 Personal requirements........................................ 5
2.5 Safety signs on the Table saw............................ 6
2.6 Safety devices .................................................... 6
2.7 General safety instructions ................................. 6
3 Intended Use............................................ 7
4 Residual risks.......................................... 8
5 Technical Data......................................... 8
5.1 Type plate........................................................... 9
6 Transport, Packaging and Storage........ 9
6.1 Delivery and Transport ....................................... 9
6.2 Packaging........................................................... 9
6.3 Storage ............................................................... 9
7 Description of the device ..................... 10
8 Set up before Commissioning ............. 10
8.1 Requirements for the installation site................ 10
9 Assembly ............................................... 11
9.1 Mount the rip fence........................................... 12
9.2 Mount table extension....................................... 12
9.3 Disassembly of the saw blade .......................... 13
9.4 Lifting, lowering and swiveling the saw blade ... 13
9.5 Assembly of the splitting wedge ....................... 14
9.6 Mounting the saw blade guard.......................... 14
9.7 Mount suction connection................................. 14
9.8 Assembly sliding carriage................................. 14
10 Set up ................................................... 16
11 Electrical connection .......................... 16
12 Commissioning ................................... 17
13 Work instructions................................ 17
13.1 Cutting wide workpieces................................. 17
13.2 Cutting narrow workpieces ............................. 18
13.3 Cutting edges and strips................................. 18
13.4 Cross cutting narrow workpieces.................... 18
13.5 Covert cutting, folding..................................... 18
14 Care, maintenance and repair............ 19
14.1 Care after work ............................................... 19
14.2 Maintenance and repair.................................. 19
15 Troubleshooting.................................. 20
16 Disposal, recycling of old equipment ... 20
16.1 Decommissioning ........................................... 20
16.2 Disposal of electrical equipment..................... 21
16.3 Disposal of lubricants...................................... 21
17 Spare parts .......................................... 21
17.1 Ordering spare parts....................................... 21
17.2 Spare parts drawing TKS 316 E 230V_400V .... 22
18 Electrical wiring diagrams TKS 316 E .. 24
19 EC-Declaration of Conformity............ 25