Introduction
TKS 316 E | Version 1.02 3
1 Introduction
You have made a good choice by purchasing a HOLZ-
STAR TKS 316 E.
Carefully read the operating instructions prior to
commissioning.
They describe correct commissioning, intended use and
safe as well as efficient operation and maintenance of
your table saw.
The operating instructions form part of the table saw.
Keep these operating instructions at the installation loca-
tion of your table saw. Also observe the local accident
prevention regulations and general safety regulations for
the use of the table saw.
1.1 Copyright
The contents of these operating instructions are pro-
tected by copyright. Their application is permitted within
the context of the use of the table saw. Any further use
shall not be permitted without written consent by the ma-
nufacturer. For the protection of our products, we shall
register trademark, patent and design rights, as this is
possible in individual cases. We strongly oppose any in-
fringement of our intellectual property.
1.2 Customer service
Please contact your specialist retailer if you have any
questions regarding your table saw or require any techni-
cal information. Your specialist retailer will be happy to
support you with specialist advice and information.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair-Service:
Fax: 0049(0)951 96555-111
E-Mail: service@stuermer-maschinen.de
Internet: www.holzstar.de
Ordering Spare parts :
Fax: 0049(0)951 96555-119
E-Mail: ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application, whichthen
could be shared and be valuable to develop ourproducts
even further.
1.3 Limitation of liability
All information and instructions has been compiled on
the basis of the state-of-the-art, valid standards and gui-
delines as well as our many years of expertise and expe-
rience.
The manufacturer shall not be liable for damage in the
following cases:
- Non-observance of these operating instructions
- Unintended use
- Deployment of untrained staff
- Conversions at one's own responsibility
- Technical modifications
- Use of unauthorised spare parts
The actual scope of delivery may deviate from the expla-
nations and illustrations described here in the case of
special designs, use of additional order options or due to
the latest technical changes.
The obligations agreed in the delivery contract, the gene-
ral terms and conditions as well as the delivery conditi-
ons of the manufacturer and the legal regulations valid at
the time of the conclusion of the contract apply.
2 Safety
This section provides an overview of all important safety
packages for personal protection as well as safe and reli-
able operation. The sections on individual service life
phases contain additional, specifically applicable safety
information.
2.1 Symbol explanation
Safety Instructions
Safety instructions in these operating instructions have
been highlighted with symbols. Safety instructions are in-
dicated by signal terms that express the degree of risk
involved.
DANGER!
This combination of symbol and signal term indi-
cates a directly dangerous situation which may
cause death or serious injury if not averted.
WARNING!
This combination of symbol and signal term indi-
cates potentially hazardous situations which may
cause death or serious injury if not averted.
To Next Page
Loading...
