4 TKS 316 E | Version 1.02
Safety
Tips and recommendations
Observe the safety information in these operating in-
structions to minimise the risk of personal injury as well
as material damage and prevent hazardous situations.
2.2 Personal protective equipment
Personal protective equipment is intended to protect the
health and safety of persons at work. Staff must wear the
personal protective equipment indicated in individual
sections of these operating instructions when carrying
out the different tasks on the machine.
The personal protective equipment is described in the
following section:
2.3 Responsibility of the Operator
Operator
The operator is the person who operates the table saw
for commercial or commercial purposes or gives it to a
third party for use or application and bears legal product
responsibility for the protection of the user, personnel or
third parties during operation.
Operator obligations
If the table saw is used in the commercial sector, the
operator of the table saw is subject to the legal obligati-
ons for occupational safety. For this reason, the safety
instructions in this operating manual as well as the
safety, accident prevention and environmental protection
regulations applicable to the area of application of the ta-
ble saw must be observed. The following applies in parti-
cular:
CAUTION!
This combination of symbol and signal word indicates
a potentially hazardous situation which, if not avoi-
ded, could result in minor injury.
ATTENTION!
This combination of symbol and signal term indi-
cates a potentially hazardous situation which may
cause minor or light injuries if it is not averted.
NOTE!
This combination of symbol and signal term indi-
cates a potentially dangerous situation which may
cause material damage or harm the environment if it
is not averted.
Tips and recommendations
This symbol highlights useful tips and recommenda-
tions as well as information for efficient and reliable
operation.
Hearing- and Head protection
The hearing protection protects the ears against
damages of hearing due to noise. The industrial hel-
met protects the head against falling objects and kno-
cks against stationary objects items.
Eye protection
Protective glasses protect the eyes against projected
parts and splashes of liquid.
Protective gloves
The protective gloves provide protection for the
hands against sharp-edged components, as well as
against friction,abrasions or deeper injuries.
Safety boots
The safety shoes protect the feet from bruising, falling
parts and slipping on slippery surfaces.
Protective clothes
Protective clothing is tight-fitting work clothing, with no
protruding parts, with low tear resistance.
To Next Page
Loading...
