7
Keep pressing for more than 0.5 seconds, it will continuously increase or decrease.
It also can be used to adjust the setting value in the setting state.
5.4 “Program” button
To select 12 preset automatic programs P01 ~ P12.
5.5 “Mode” button
To switch between various modes in standby mode. Including time countdown (setting
range 5: 00 ~ 99: 00), distance countdown (setting range 1 mile ~ 99 miles), calorie
countdown (setting range 20 ~ 990). After the treadmill is started, every window will be
displayed cyclically at an interval of 5 seconds. You can press the "M" button to switch
between cyclic display mode and single display mode.
5.6 “SAFE KEY” button
In case of emergency, press the “SAFE KEY” button to cut power instantly.
7. Fold And Unfold
(1) Fold：
Unscrew the knobs, lay the handle bar down clockwise, then screw the knobs to the frame.
(2) Unfold：
Loosen the knob and uplift the handle bar anticlockwise to the certain angle, then tighten the knobs.
To Next Page
Loading...
Need help?
General
