3
SYMBOLS
Important: Some of the following symbols may be used on the product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
Safety alert
Indicates danger, warning or caution. It means attention. Your safety
is involved.
Read your operator’s
manual
Your manual contains special messages to bring attention to potential
safety concerns as well as operating and servicing information.
Please read all the information carefully to ensure satisfaction and
safe use.
Wear eye, hearing and
head protection
Wear eye, hearing and head protection when operating the product.
Beware of thrown or ying objects. Keep all bystanders (especially
children and pets) at least 15 m away from the work area.
Boots Wear non-slip safety footwear when using the product.
Gloves Wear non-slip, heavy-duty gloves.
No smoking Do not smoke when mixing the fuel or lling the fuel tank.
Petrol
Use regular unleaded petrol intended for motor vehicle use with an
octane rating of 91 ([R+M]/2) or higher. E10 is not recommended.
Oil Use synthetic 2-stroke oil for 2-stroke engines.
Mix petrol and oil Mix the fuel mix thoroughly and also each time before refueling.
No blade Do not install any type of blade on the product.
RPM Decal
Rotational direction and maximum speed of the shaft for the cutting
attachment.
Regulatory Compliance Mark (RCM). The product meets applicable
regulatory requirements.
Set the choke lever to “Run” position (no choke).
To Next Page
Loading...
Need help?
General
