Homematic IP HmIPW-SPI User Manual

57
Restore factory settings
1x orange
and 1x green
lighting (after
establishing
power supply)
Test display After the test dis-
play has stopped,
you can continue.
9 Restore factory settings
The factory settings of the device can be restored.
If you do this, you will lose all your settings.
To restore the factory settings of the device, please
proceed as follows:
• Press and hold down the system button (B) until the
LED (B) quickly starts flashing orange (see fig. 14).
• Release the system button again.
• Press and hold down the system button again for
4 seconds, until the LED lights up green (see fig-
ure 14).
• Release the system button to finish the proce-
dure.
The device will perform a restart. After the restart, you
can again integrate your device into your Homematic IP
system.

Homematic IP HmIPW-SPI Specifications

General

Brand	Homematic IP
Model	HmIPW-SPI
Category	Accessories
Language	English