51
Start-up
Connecting to the Homematic IP Central Control Unit
CCU3
For local, software-based configuration and control via
PC, you can connect the presence sensor to a Central
Control Unit CCU3 and to use it in comprehensive pro-
grams (see “6.4.1 Connecting to the Central Control Unit
CCU3” on page 51).
Connection to the Homematic IP cloud
For a flexible control via free smartphone app, con-
nect the device
to the Homematic IP cloud (see “6.4.1
Connecting to the Central Control Unit CCU3” on page
51). You can
• control the wired system via smartphone app
using the Homematic IP Wired Access Point
(HmIPW-DRAP) or
• combine wired devices with wireless Homematic
IP devices via the Homematic IP Access Point
(HmIP-HAP).
6.4.1 Connecting to the Central Control Unit CCU3
To control and configure Homematic IP wired devices
software-based and comfortably as well as use it in cen-
tral control unit programs, you have to connect it to to
the WebUI. To connect the device to the Central Control
Unit CCU3, proceed as follows:
• Set up your Central Control Unit CCU3 as de-
scribed in the operating manual and connect the
To Next Page
Loading...
