OPERATION
STOPPING THE ENGINE
Emergency Engine Stopping
Disengage the emergency engine stop switch clip from the engine stop switch
by pulling the lanyard.
It is a good idea to stop the engine with the emergency engine stop switch
lanyard from time to time to be sure that the switch is operating properly.
Normal Engine Stopping
ENGINE STOP
SWITCH
EMERGENCY ENGINE STOP
SWITCH LANYARD
1. Turn the throttle grip to the SLOW position, and move the gearshift lever to
the N (neutral) position.
NEUTRAL
ARSHIFT LEVER
THROlTL
2. Push the engine stop switch button until the engine stops.
3. Remove the emergency engine stop switch lanyard and store it.
OP BUlTON
In the event that the engine does not stop when you push the engine stop
switch, pull the emergency engine stop switch lanyard. If the engine continues
to run, pull the choke knob to stop the engine.
34
To Next Page
Loading...
